DIY Elsa Inspired Cape

Ok, so I promise that not all of my posts are going to involve Elsa and Disney’s Frozen. Seriously, I promise. But right now, it seems like it is unavoidable. Like I mentioned in a previous post, my niece loves to sing, dance to, and act out the entire scene that corresponds to Let it Go. It’s really quite cute and pretty darn impressive. When I was watching her go through the motions, it became clear, she absolutely NEEDS an Elsa cape.

DIY Elsa Inspired Cape

Materials:

Blue snowflake material (I used some from Joann’s)
Matching Thread
Assorted trims

How to:

  1. Create your pattern. I decided to do a “half-circle” shaped cape to give the cape some good swirl and swish. Perfect for dancing in! Create a pattern for yourself out of wrapping paper or tissue paper. Appropriately for this time of year, I used Christmas paper.
    You are aiming for ¼ of a circle for your pattern (that will fold out to half of a circle). The radius of that circle should be the length of cape you wanted. For my 4 ½ year old niece, that length was 38″. You will do a much smaller 1/4 circle at the top for the head and shoulders. The following graphic should help illustrate what you are going for…
    Cape1
  2. Lay out your pattern on your fabric on the fold. Pin and cut out.
    IMG_4342
    Here is the shape you are going for.
    Cape2
  3. Next, I decided she needed a stand collar. I measured the opening of the cape and drafted a simple pattern (see below). I’m sure there is a right way to do this, but I just measured the opening at the top of the cape and decided about how tall I wanted the collar, and I drew a slightly curved shape within those dimensions. My dimensions were 13″ x 4″.
    Collar pattern
  4. Right sides of collar together, sew the top and two sides. Trim seams, clip corners, turn out, and press. Pin the collar to the cape, right sides together. Sew the seam. Trim seams, press and then top stitch. This helps the collar stand up.
    Stand Collar
  5. Next I hemmed the front edges of the cape.
  6. Now is the fun part, trim!!I promised my niece that we would work on her cape together so I pulled out all the lace, ribbon, trims, buttons, etc. that I could find and I let her pick out how she wanted to embellish her cape. Uh, a bit of a mistake. She ended up choosing red rickrack and black sequins… With some coaxing I talked her into some silver ribbon and white lace, but she insisted on the pink ribbon for the tie. Not exactly Elsa, but you can’t blame a girl for loving pink. You can, of course, use your own judgment on how to embellish.I started with lace along the bottom of the cape and added some silver ribbon about 1/2″ above the lace.
  7. I then attached the pink ribbon around the neck. Along with some sparkly buttons just for fun.
    Elsa Cape

And there you have it, an Elsa inspired cape!

–h

P.S. Can’t get enough of Elsa? Check out this simple Frozen inspired t-shirt!

Advertisement

Tutu Tuesday: Part I Tulle Circle Skirt

Confession: With the new baby at home, I’ve become a Dutch Bros junkie. Seriously, it’s getting bad. Last Tuesday, I drove up and everyone was wearing a tutu and a tiara. I’ll admit I was just a little jealous!! So I told the girl getting my coffee that I loved her look, and she replied…We’ve established it as Tutu Tuesday.

Um, every girl needs a Tutu Tuesday, don’t you think? So here’s a DIY Tulle Skirt for you…

Tulle Circle Skirt

I found a ton of great tutorials on Pinterest, check-out my Crafty Ideas board for several good ones. If you run into questions during my tutorial, those might fill in any gaps. 🙂

Materials:

  • 6 yards (at least) of Tulle – I used green because I was Disneybounding Mike Wazowski for Halloween.
  • Appx 1 yard of matching Lining Fabric
  • Elastic the size of your waist plus 1 inch – You want this to fit snugly, but not too tight (we don’t want a tulle skirt muffin top, yikes!)

IMG_4075

How-to:
1. Determine the length of your skirt. Measure from your waist down to where you want the skirt to end. I went down to my knee.

2. Determine your waist radius. Measure around your waist, divide that by 3.14, then divide that by 2. That gives you your waist radius.

3. You are basically going to cut out a number of tulle “doughnuts” out of squares of tulle. So add the waist radius to the skirt length and multiply by 2. That will be the length you cut your fabric. You also want the width of the tulle to be at least equal to that same measurement. So cut several of these pieces. I would do at least 4. Do the same for your lining fabric (just 1).

Here’s what we are going for:

FAbric

4. Now fold each piece in half lengthwise. You should have a square piece of fabric with 2 folded sides.

Fabric2

5. Now take your waist measurement and skirt length to create your pattern.

Skirt pattern

Tip: Create a pattern out of tissue paper or wrapping paper. You’ll thank me for this step because tulle can be challenging to work with.

If you think about it, here are the tulle doughnuts you are cutting out so make sure your folds are the right places…

Skirt graphic

6. Pin your pattern to your first piece of tulle, and cut out. Repeat 4+ times and 1 time for your lining fabric.

7. Hem your lining fabric.

8. Take your tulle and lining circles and layer them on top of each other. Pin and baste around the waist line.

9. Take the ends of your elastic and overlap ½” and sew together (remember this is an important stitch that will have pressure one it).

10. Pin your skirt to the elastic. Zig-zag stitch around. Done!

Tulle Circle Skirt

Again, this was for a Halloween costume, I’m excited to make one in black or red for the holidays.

Happy Tutu Tuesday!! Also, anyone also in the mood for a doughnut or some coffee now?

–h

P.S. Part II continues here