Over the years I have really enjoyed making different quilts for people. When Ryan and I were first dating, I made him a quilt out of black and leopard print polar fleece. Wow, lucky Ryan right? Believe it or not, we use that quilt to this day (some 12-13 years later). He actually did like it, seriously, you can ask him. Seriously!

When I make a quilt for someone it is my way of expressing love. To me, nothing says “I love you” like putting that much time and energy into something for someone else. Even further, I like to think about the recipient as I am working and pray for them. It just feels good!

Anyway, back to work… If you missed Part I, you can read it here.

Sewing the Quilt:

1. I started by lining up the large gray star on the inner circle of the shield, pin. Then I zig-zag stitched it into place.
   
2. Take the inner-circle/star piece and line it up on the next circle layer. I measured around the circle to make sure I had it just right. Pin, and stitch the same way. Repeat until you have your Captain America shield sewed together.
   Note: I decided to match thread color depending on which ring of the fabric I was sewing.
   
   
3. Now that the shield is complete, I pinned it to the center of the navy blue background fabric. I didn’t sew it on yet, instead I used to help me decide on the placement of the additional stars. I decided to do three stars in each corner (one Marvel print, one red, one gray). I played around until I liked the look of everything and pinned the stars on.
   
4. Next I removed the shield from the backing. I left a safety pin to mark the spot (just to keep the shield from getting too beat up). Then I sewed on each star  with a zig-zag stitch all around. I used red thread for all the stars, totally up to your taste how to use the colored thread.
   
5. Once all the stars were on, I went back and repinned the shield, zig-zig stitch to attach. Now the face of the quilt is ready. At this point, I pressed the entire front.
6. Next up is creating a quilt “sandwich.” Lay out your back (pay attention to the orientation of the print). Then layer on the quilt batting. Then top with your quilt front. Voila, you have a quilt sandwich. I do this on the floor of my dining room (after I have swept, I promise).
7. Once you feel good about the line-up of the three layers. I grab a ton of safety pins and pin all three layers every so often. This makes sure you get the all lined up nicely and that it lays flat without wrinkles.
   
8. I’m not sure if this is the right order of things, but I don’t actually quilt my quilts…I use ties instead. Babies like playing with the ties, and it seems a little easier to me. Anyway, I do the ties last, so normally you would quilt at this stage, but I didn’t I moved onto binding. (See my disclaimer :-))
9. Once all the safety pins are in place, and you feel good about everything. Take a rotary cutter and mat and trim up the edges. You can pin around the edges or even baste all the way around…
   
10. Binding:
    • Next I made my own binding out of red flannel. They were 3” wide and you need enough length for the entire perimeter of the quilt. I over-estimate on the length a little bit to make sure I have plenty of binding so that it isn’t too stressful. I attached the lengths of fabric by sewing pieces together at a 45 degree angle. Now you have one LONG piece of binding. Fold in half lengthwise.
      
    • Next I worked on attaching the binding. This is a little complicated… On the back of the quilt, pin raw edges of the binding to the right side of the fabric starting in the middle of one side, leaving yourself a few inches to play with at the beginning. Pin all the way to ¼” from the corner. Sew that section.
      
    • Once you get to the pin ¼” from the corner, stop sewing. Take the binding and fold it up at a 90 degree angle from the quilt. Then fold back down, pin. These pics should really help…
      
      
    • Pin all the way across the next edge, stopping ¼” from the next corner. Repeat until you make it all the way around to the end. Leave a few inches to play with when you get back to where you started.
    • Flip the quilt over to the front, and fold the binding over and pin. Some people hand sew at this point, I just machine sew all around. Here’s how you do the corners…
      
      
    • To finish, I fold the raw edge over about ¼” and tuck the other side under. Sew shut.
11. I finished by putting ties every so often, usually about where I put all my safety pins. I used red embroidery floss and finished with a square knot (right over left, and left over right).

And…

drumroll please…

Here is the finished Marvel/Captain America Inspired Quilt!! And BTW, my nephew loved it!!

–h