Marvel’s Black Widow Inspired Infinity Scarf

A big Marvel movie releases and there isn’t any Black Widow clothing or accessories to be found. How can that be? She quite literally kicks butt, but doesn’t warrant merchandise?

What’s a girl to do? Since I don’t want to make, much less wear a black leather jumpsuit (shocked, I know), I thought I could make a screen-printed infinity scarf with a subtle (or not so subtle) nod to this super heroine.

Materials:
Black knit fabric (cut to 16″ x 75″)
Thread
Red fabric paint (I used Martha Stewart Tartan Red)
Mod Podge
Embroidery hoop
Nylon
Small paint brush
Credit card or gift card

DIY:
1. Ok, it seems like a lot going on, but it is pretty simple, I promise. I started by sketching out the design I wanted to print. I looked for some references online and created my own “black widow” symbol.

2. I found a great blog post on how to screen print using Mod Podge, check it out here. I’ll also give a brief explanation. Stretch your nylon tightly across the embroidery hoop. Then place it face down on your design and trace it with a pen (I used a Sharpie). Once you transfer the design, take your Mod Podge and carefully paint it on the parts of the “negative space” on the nylon. Basically what you DON’T want to show paint. Take your time, this is important. Two coats.

Black Widow Scarf Screen Print logo

3. Next, I cut out my fabric to 16″ x 75″, I wanted a nice long infinity scarf. You might want to measure your favorite scarf to find the perfect size for you!

4. I laid out my fabric on a piece of cardboard and pinned it down securely. I then decided how I wanted my pattern to repeat and put pins in those locations. This image should demonstrate this step…
Black Widow Scarf Screen printing in progress

5. Now it’s time to screen print. A little frightening, I know. But truly, it was easier than I thought it would be. With the nylon face down against the fabric, squirt some red paint onto the nylon, then use a credit card, gift card, piece of cardboard, etc. to swipe the paint evenly across the nylon. You might swipe a couple different directions to make sure there is even coverage. Then carefully lift your hoop/printer. Make sure to hold down the fabric when you do so, this will save you some smears.

5. Repeat, repeat, repeat! Between prints, be sure to check the surface of the nylon (the side that goes against the fabric), if any paint has leaked out, wipe it up to keep your printing crisp. As you go, don’t worry if a few of the repeats aren’t perfect. This is a draped scarf so likely you won’t see the imperfect ones. Also, I like the idea of this looking a little vintage, hence the screen printing, so embrace those imperfections!!
Black Widow Scarf Screen Printing

6. Once you have printed the entire scarf, allow it to dry completely before sewing. Seems obvious, but if you get excited like me, you might forget. 🙂 I chose a fabric that I didn’t have to hem, so all that left is to sew the ends together. For a neat finish, a flat-felled seem is a good choice, but can be difficult to execute on knits. So I’ll tell you my cheater way to do it…basically a french seam sewed down. So, wrong sides together, seam then trim. Then flip it around and sew with right sides together so the original seam and trimmed seam allowance is inside. You now have a finished “flap.” Pin the flap down to one side and top stitch. Quite tidy and worth the extra 5 minutes.
Black Widow Scarf finished on table Rockin the Black Widow Scarf

Now all that’s left is to pair your brand new scarf with some killer boots and an attitude to match!

–h

P.S. As I was working on this scarf, I cut right through my “self-healing” mat. Exploring my own super-human strength apparently! 😉

Black Widow Infinity Scarf DIY

Can’t get enough of Marvel or the Avengers? Check-out my Captain America quilt, Part I and Part II!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s